PTE

EBAN2000 MK2 Coating Thickness Gauge

Please visit our online store www.LoggerOnline.com
for details.

The Coating Thickness Gauges Eban2000Mk2 and Eban3000Mk2 are top of range Coating Thickness Meters and are top performance instruments with a modular design allowing an extensive range of feature options to be chosen at time of purchase or upgrade in the future.

Easy to use, place the probe on the coating to be measured, there will be a beep and the measurement will be displayed, this will be retained on the display until the next measurement has been taken.

Easy and accurate multi calibration facility for different substrate shapes and blast cleaned profiles.

Detachable flexible lead, constant pressure measuring probes.

Conforms to BS5411, BS3900, ISO2178, ISO2360, ISO2808, DIN50981, ASTM B 499 and SSPC methods of measurement.

Calibration Certificates having traceability to UKAS are available for both the Eban instruments and the Calibration Foils.

Accuracy of up to ±1% when referred to reference standards.

Eban2000Mk2 standard range model. Simply select the features that you need either at the time of purchase or upgrade in the future. The Eban2000Mk2 also has the option of upgrade to the higher specification Eban3000Mk2

Features in as standard: Backlight, Battery Life Check.

Feature options A (Part No CA001): Mean / Average, No of readings, Micron / Thou conversion.

Feature options D (Part No CA002): Company name permanently personalised. Appears on display at switch on and on every printout. Good security feature.

Range of Models

C2200 - Eban2000Mk2 Ferrous 0-1000µm

C2201 - Eban2000Mk2 Non Ferrous 0-1000µm

C2202 - Eban2000Mk2 Ferrous & Non Ferrous combined 0-1000µm

C2203 - Eban2000Mk2 Ferrous 0-5.00mm

C2204 - Eban2000Mk2 Non Ferrous 0-2000µm

C2205 - Eban2000Mk2 Ferrous 0-5.00mm & Non Ferrous combined 0-2000µmAccessories

NC001 - Calibration Certificate UKAS traceable

NC002 - Foils Calibration Certificate UKAS traceable

K2002 - Paint Inspectors Kit

NK002 - Set of Calibration Certificates for K2002

Ferrous models will measure all non-ferromagnetic coatings on Steel and Iron substrates. Examples: Paint, Epoxy, Tin, Copper, Zinc, Cadmium, Galvanizing, Metal spray, Chrome, Powder Coating, Lacquer and Enamel etc.

Non ferrous models will measure all non-conductive non-ferromagnetic coatings on conductive non-ferrous substrates. Examples: Paint, Anodizing, Powder Coating, Lacquer, Plastics etc on Aluminium, Brass, Copper and Non-magnetic Stainless etc.

Combined Ferrous and Non ferrous versions are available which will measure all of these combinations.